2023 Drag & Parts Unlimited Update

ENGINE

SECTION 7 FATBOOK

OE+ OILING SYSTEM/​CAMCHEST FRESHEN UP KIT FOR TWIN CAM •Freshen up camchest and oiling system on late model Twin Cam engines

NOTE: Designed for use with 07-17 chain drive camshafts. See Feuling camshaft selection: PART #0928-0427 (525 Grind), PART #0925-0673 (543 Grind), PART #0925-0430 (574 Grind), PART #0925-0677 (594 Grind) and PART #0925-0433 (630 Grind).

•Kit uses existing camshafts or allows purchase of preferred cam selection while upgrading camchest with a new OE+ high volume oil pump, OE+ camplate, HP+ lifters, billet tensioner housings, tensioner pads, cam/​crank sprockets, sprocket alignment spacers, cam chains, cam bearings, hardware, gaskets and O-rings •Made in the U.S.A.

PART #

DESCRIPTION

SUG. RETAIL $1,195.95

0932-0300

For all 07-17 Twin Cam and 06 Dyna

CAMS FOR 17-23 M-EIGHT •Made in the U.S.A. •See pages 753-754 of the 2023 Drag Specialties FatBook for the full line of Andrews cams 465B • Bolt-in chain drive cam for 107”-117” engines •Available with stock valve springs •For heavy and middle weight bikes •Great low to mid rpm torque (1200-5600 rpm)

0925-1509

485 •Highest lift bolt-in chain drive cam available with stock valve springs • Bolt-in cam for 107” engines and larger •Excellent low to mid rpm power (1500-5600+ rpm)

PART #

DESCRIPTION

SUG. RETAIL

PART #

DESCRIPTION

SUG. RETAIL

0925-1509

$251.95

465B

0925-1510

$251.95

485

GRIND 465B Intake Exhaust

OPEN

CLOSE

DURATION @ .050”

VALVE LIFT

LIFT TDC

LOBE CENTERLINE

10° 46°

20° 10°

210° 236°

.464” .460”

.126” .122”

95°

108°

485 Intake

7.5°

29.5° 14.5°

217° 247°

.485” .485”

.116” .145”

101° 109°

Exhaust

52.5°

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. SEE PAGES 4-5 FOR IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS.

BLUE part numbers are new for 2023

65

FATBOOK UPDATE | 2023

DRAGSPECIALTIES.COM